Hammer Grease Contains Graphite 36 x 400gm, Suitable for Hydraulic Hammers, also Pin & Bush and Open Gear Applications

Product Description:

Hammer Grease is specially developed using a blend of semi-synthetic base oils manufactured with high temperature thickener containing a high level of graphite to extend lubrication periods. It is designed particularly for hydraulic hammer lubrication, pin and bush type of applications, on large earth moving and general off-road heavy plant machinery.

Hammer Grease is enhanced by the addition of laminar lubricating solids, and its adhesive properties resist water wash off. This product has also found use in the lubrication of open gears.

Benefits:

High degree of water resistance

Reduced grease leakage tendency

Excellent load carrying capability and shock load resistance

Good sealing properties in dusty conditions

Inherent adhesive nature

Application:

Hammer Grease can be applied manually, or by using a standard grease gun (400g cartridges available). As with all greases used for the first time, check compatibility with the grease applied previously and if necessary, purge bearings prior to application. Likewise, as a rule, take care not to over-lubricate and apply the quantity of grease recommended by the manufacturer.

Storage:

Products should always be stored in the original packaging in a clean indoor area. Ideally, the storage temperature should be between 0°C to 25°C. Products should be stored away from any sources of heat including direct sunlight.